Fast Recovery Diodes OLD Part Number 5SDF ABB Replacement

Fast Recovery Diodes in disc design are press pack type general-purpose diodes with blocking voltages up to 4500V and current ratings up to 1340A.

Fast Recovery Diodes ADF AS ENERGITM are a replacement, analog, alternative semiconductor devices for Standard Fast Recovery Diodes ABB Power Grids Switzerland, Hitachi Energy.

"Air-cooled heatsinks O series for disc devices", "Air heatsink SF series", "Water heatsink SS series" for thyristor cooling are also available to order.

Part numbering guide for fast recovery diodes

youtubeVideo: Reviews of high power disc diodes

icon AS ENERGITM Semiconductors Manufacturing Reference

OLD Part Number is a product line of diodes that have been discontinued and are no longer produced, AS ENERGITM offers analogues for OLD Part Number Fast Recovery Diodes ABB (ABB – Polovodice Products Cross Reference List).

Fast Recovery Diodes are particularly suitable for use as anti-parallel diodes used in Gate Turn-Off and Fast Thyristor inverters and as diodes for choppers.

Features: class-leading performance and reliability; optimised for line frequency; low on-state losses; high reverse voltage and high current handling capabilities, high surge capability.

Rectifier diodes convert DC and AC currents up to 12.1 kA in circuits with voltages up to 7.2 kV. Their main applications are rectifiers for variable large AC drives, traction converters, trackside substations, welding and DC power supplies. Devices are primarily intended for applications with line frequencies up to 500Hz.

The diode has an industry standard ceramic housing making it easy to integrate the device into existing equipment. This diode has a disc housing with pressure contacts. The polarity of the diode (anode, cathode) is determined by the icon on the case. The technical specifications, part numbering guide, datasheets PDF, outline drawings for rectifier diodes are listed below.

Rectifier Diodes AS ENERGITM have the following features: low static and dynamic losses, high values of VRSM/VRRM, extensive experience of using the devices in various industries, range of voltages from 100 to 9000 V and amperages from 10 to 15000 A, high resistance to thermal and electric cycling.

Our company provides a quality guarantee for rectifier diodes of 2 years from the date of purchase. When supplying diodes, if necessary, we provide technical passport and certificate of conformity.

Read more

The final price of fast recovery diodes depends on the voltage class, quantity, delivery terms, manufacturer, country of origin and form of payment.

General specifications of Fast Recovery Diodes 5SDF ABB and Replacements

ABB – Polovodice Products Cross Reference List

Type IF(AV)M VRRM IFSM VF0 rF Package Dimensions Replacement
ABB Part No. Polovodice Part No. A V A V mΩ ØDxØdxH PDF
5SDF 03D4004 DC 827-300-40 N 275 4000 5000 2.15 2.8 D 60x34x26 ADF 300-40-D-04
5SDF 03D4504 DC 827-300-45 N 275 4500 5000 2.15 2.8 D 60x34x26 ADF 300-45-D-04
5SDF 11H4005 DC 8891100-40 P 1340 4000 23000 2.429 0.645 H 102x63x26 ADF 1100-40-H-05
5SDF 11H4505 DC 8891100-45 P 1340 4500 23000 2.429 0.645 H 102x63x26 ADF 1100-45-H-05
5SDF 12F2505 DM 8181200-25 P 1256 2500 19000 1.195 0.245 F 75x47x26 ADF 1200-25-F-05
5SDF 12F3005 DM 8181200-30 P 1256 3000 19000 1.195 0.245 F 75x47x26 ADF 1200-30-F-05
5SDF 08F4005 DM 818800-40 P 767 4000 15000 1.807 0.735 F 75x47x26 ADF 800-40-F-05
5SDF 08F4505 DM 818800-45 P 767 4500 15000 1.807 0.735 F 75x47x26 ADF 800-45-F-05
5SDF 12T2505 DM 818C-1200-25 P 1256 2500 19000 1.195 0.245 T2 74.5x47x22 ADF 1200-25-T-05
5SDF 12T3005 DM 818C-1200-30 P 1256 3000 19000 1.195 0.245 T2 74.5x47x22 ADF 1200-30-T-05
5SDF 08T4005 DM 818C800-40 P 767 4000 15000 1.807 0.735 T2 74.5x47x22 ADF 800-40-T-05
5SDF 08T4505 DM 818C800-45 P 767 4500 15000 1.807 0.735 T2 74.5x47x22 ADF 800-45-T-05
5SDF 04D4004 DM 827360-40 N 361 4000 6000 1.858 1.543 D 58.5x34x26 ADF 400-40-D-04
5SDF 04D4504 DM 827360-45 N 361 4500 6000 1.858 1.543 D 58.5x34x26 ADF 400-45-D-04
5SDF 06D2504 DM 827620-25 N 615 2500 10000 1.196 0.461 D 58.5x34x26 ADF 600-25-D-04
5SDF 06D3004 DM 827620-30 N 615 3000 10000 1.196 0.461 D 58.5x34x26 ADF 600-30-D-04
5SDF 04T4004 DM 827C360-40 N 361 4000 6000 1.858 1.543 T1 58.5x34x20 ADF 400-40-T-04
5SDF 04T4504 DM 827C360-45 N 361 4500 6000 1.858 1.543 T1 58.5x34x20 ADF 400-45-T-04
5SDF 06T2504 DM 827C620-25 N 615 2500 10000 1.196 0.461 T1 58.5x34x20 ADF 600-25-T-04
5SDF 06T3004 DM 827C620-30 N 615 3000 10000 1.196 0.461 T1 58.5x34x20 ADF 600-30-T-04

Part Numbering Guide for Fast Recovery Diodes:

A DF 800 45 F 05
DF Product group: Diode, Fast Recovery.
800 Average on-state current IF(AV), Amp.
45 Voltage class VRRM / 100.
F Housing (package) type.
05 Version number.

High Power Semiconductors AS ENERGITM

Our company is engaged in the manufacturer and sale of wide range of power semiconductors (power thyristors, modules, rectifier diodes, avalanche, rotor and welding diodes, triacs etc.) currents up to 15000A and voltages to 9000V, and air and water heatsinks to them.
You can buy semiconductor devices in any volumes, and when ordering large lots, the price will be lower. We have earned the trust of customers and supply products all over the world.

For questions regarding the acquisition of Power Thyristors, Diodes, Modules send an email request to:

[email protected]

And we will provide you a commercial offer for delivery.
For a large number, we will provide an individual price!!!

We are open to manufacture products at our production facilities
according to your requests and technical task.

Photo Gallery

The photo gallery shows many different semiconductor devices, semiconductor chips and SCRs produced by AS ENERGITM, examples of test reports.

Photo of Rectifier Diodes:

Installation recommendations for disc type power rectifier diodes:

Assembling a diode with a heatsink

The reliability of heat transfer and electrical contact between the mating surfaces of the diode and the cooler over the entire temperature range is ensured by appropriate torque (clamping force).

Before assembly you should perform visual inspection (1) contact surfaces for mechanical damages and wipe (2), soaked with alcohol (toluene, gasoline, acetone).

After inspection, fix the current contacts (leads), install a pin to fix the alignment of the structure.

To improve the parameters of heat transfer it is recommended to lubricate (3) a thin layer of silicone thermal conductive paste before the assembly, which is not a mandatory condition for installation.

Install the diode (3), the second part of the cooler, the fiberglass insulator and the thrust washer.

To thread the traverse (4) and evenly tighten the nuts. Make sure no misalignment and evenness of the contact surfaces.

When the parts are sufficiently clamped but moveable, we recommend placing the cooler on a flat surface and checking the tolerance for parallelism of the overall adjacent plane of the surfaces (5).

Clamp each nut in turn (about a quarter turn) to the stop (6). The amount of deflection of the traverse determines whether the achieved clamping force corresponds to the required one.

After installation, the fasteners (nuts and washers) must be additionally secured against corrosion.

Tips and recommendations for power diodes:

The power diodes should not be operated for long periods of time at their limit load for all parameters. In this case, the safety factor is determined by the required degree of reliability of the device.

Replace a failed power diode with a diode that matches the parameters of the one being replaced.

Supercooling must be provided when operating in an environment with an elevated ambient temperature.

Periodic cleaning of power diodes and coolers to remove dust and contaminants is recommended to ensure proper heat dissipation.

Inductive current dividers (often twisted toroidal wire) should be used to equalize currents between power diodes connected in parallel. The most popular connection methods are closed circuit, common coil circuit, or power diode. The efficiency of current dividers in this case is determined by the cross section of the magnetic wire.

Prevention of voltage unbalance when power diodes are connected in series is achieved by using shunt resistors connected in parallel with each diode. Voltage equalization in transient conditions is provided by connecting capacitors in parallel to each diode.

It is strictly forbidden to touch power diodes under high voltage during operation.

icon Why choose AS ENERGITM

  • Own production facilities, including semiconductor silicon chips production
  • European brand - 100% quality, favorable price, short production terms
  • Over 20 years of experience in the semiconductor industry
  • Clients from more than 50 countries trust us
  • 20000 items in the product line for currents from 10A to 15000A, voltages from 100V to 9000V
  • We produce analogues of other manufacturers' products
  • Guaranteed certified quality, warranty period of operation - 2 years


Quality Warranty

Our products are certified and correspond to international standards.
Our company provides a quality guarantee for products of 2 years.
We provide certificates of conformity, reliability reports, data sheets and technical passports at the request of the customer.


Each product is tested for the main parameters, and Test reports of the parameters for each product are provided.

Test Report

Geography of partnership

AS ENERGITM company manufactures and supplies power semiconductors to more than 50 countries around the world.


Logistics and Delivery

We deliver our products all over the world with the services of logistics companies: DHL, TNT, UPS, EMS, Fedex, Aramex.
Products can be delivered by any means of transport: air, sea, rail and road.


AS ENERGITM Semiconductors Manufacturing

Our products range includes rectifier diodes, phase control thyristors in disc and stud design, avalanche diodes and thyristors, fast switching, high frequency thyristors, fast recovery, welding and rotor diodes, triacs, bridge rectifiers, power modules (thyristor, diode, thyristor-diode, IGBT), and air and water heatsinks to them.

Power diodes and thyristors are produced for currents from 10A to 15000A, voltage range from 100V to 9000V.
Power diode and thyristor modules are produced from 25A and up to 1250A, voltage range 400V - 4400V.
The range of power semiconductors also includes equivalent, replacement, analogue and alternative semiconductor devices of global manufacturers.

Featured Products:


Tags: Fast Recovery Diodes, power semiconductor, Old Part Number 5SDF ABB Power Grids Switzerland replace, 5SDF Hitachi Energy replace, Polovodice Products Cross Reference List, Fast Recovery Diodes catalog catalogue pdf, ceramic insulator diodes price, Fast Recovery Diodes datasheet, certificate, manufacturing, diodes factory made, technical specification of Fast Recovery Diodes


Selected Products: