Thyristor Modules SKET Semikron Replacement
Thyristor Modules SKET Semikron have a monolithic design with a single topology of semiconductors (one switch): single thyristor. Used in DC and AC circuits with loads to 819A and reverse pulse voltages up to 2200V.
Thyristor Modules AMET AS ENERGITM is a replacement, equivalent and alternative semiconductor device for SKET Semikron.
SCR modules are housed in a SEMIPACK – industry-standard housing making it easy to integrate the device into existing equipment.
The modules are designed and assembled in high reliable pressure contact and in solder bond technology which addresses the specific requirements of cost and performance optimized applications.
Thyristor Modules are used in various power equipment - power and control units, electrical drives, power regulators, AC regulators, converters, controllers of blast furnaces or chemical processes, welding equipment, and as rectifiers for AC converters.
Our company provides a quality guarantee for thyristor modules of 2 years from the date of purchase. When supplying thyristor, if necessary, we provide technical passport and certificate of conformity.
The final price of thyristor modules depends on the class, quantity, delivery terms, manufacturer, country of origin and form of payment.
For questions regarding the acquisition of Power Modules, Thyristors, Diodes, send an email request to:
And we will provide you a commercial offer for delivery.
For a large number, we will provide an individual price!!!
We are open to manufacture products at our production facilities
according to your requests and technical task.
General specifications of Thyristor Modules SKET and Replacements
|SKET 330||SKET 330/12E||295||1200-2200||8000||320000||1.2||0.55||0.09||840||Package 4
|SKET 400||SKET 400/08E||392||800-1800||12000||720000||0.92||0.3||0.09||840||Package 4
|SKET 741||SKET 741/22 E||819||2200||26500||3500000||0.82||0.17||0.0405||1950||Package 6
|SKET 801||SKET 801/18 E||819||1800||30000||4500000||0.82||0.17||0.0405||1950||Package 6
Part numbering guide for Thyristor Modules AMET:
|M||–||Semiconductor Type: Module.|
|ET||–||Topology of internal connection: Single Thyristor.|
|330||–||Rated current (ITAV), A.|
|16||–||Voltage class (VRRM/100).|
|E||–||dv/dt class: E: 1000 V/µs|
Recommendations for mounting power modules
Heatsink and Surface Specifications, Preparation
In order to ensure good thermal contact and to obtain the thermal contact resistance values specified in the datasheets, the contact surface of the heat sink must be clean and free from dust particles. It is useful to clean the mounting surface of the heat sink with wipes and an alcohol cleaner, e.g. isopropanol, right before the mounting process. The following mechanical specifications have to be met:
– Unevenness of heat sink mounting area must be ≤ 50μm per 100 mm
– Roughness Rz: < 10 μm
– No steps > 10 μm
Heat sink surface specification
Applying Thermal Paste
Recommended to use stencil printing in order to apply thermal interface material. For SEMIPACK we recommend thermal paste thickness in the range from 50 μm to 100 μm. Applying thermal paste by means of roller is not recommended for mass production as reproducibility of an optimized thermal paste thickness cannot be guaranteed.
Mounting torque on heat sink MS
To secure power modules, the use of steel screws in combination with suitable washers and spring lock washers or combination screws is strongly recommended. The specified torque value must be observed.
|SEMIPACK 1, 2
soldered / bonded modules
|SEMIPACK 3, 4, 5
pressure contact modules
pressure contact modules
|Mounting screw||2 pcs M5x18||4 pcs M5x18||4 pcs M5x20||4 pcs M6x20|
|Mounting speed||max. 300 rpm||max. 300 rpm||max. 300 rpm||max. 300 rpm|
|Pre-tightening torque||0.6 Nm||0.6 Nm||0.6 Nm||0.6 Nm|
|Final torque MS||4.25–5.75 Nm||4.25–5.75 Nm||4.25–5.75 Nm||5.1–6.9 Nm|
A pre-tightening torque and retightening to the given torque value is recommended. For the screwing process the speed has to be limited and soft torque limitation is recommended to avoid torque peaks, which may occur with pneumatic screwdrivers.
The screws must be tightened in diagonal order with equal torque in several steps until the specified torque value MS has been reached.
Example of mounting order
Why choose AS ENERGITM
- Own production facilities, including semiconductor silicon chips production
- European brand - 100% quality, favorable price, short production terms
- Over 20 years of experience in the semiconductor industry
- Clients from more than 50 countries trust us
- 20000 items in the product line for currents from 10A to 15000A, voltages from 100V to 9000V
- We produce analogues of other manufacturers' products
- Guaranteed certified quality, warranty period of operation - 2 years
Our products are certified and correspond to international standards.
Our company provides a quality guarantee for products of 2 years.
We provide certificates of conformity, reliability reports, data sheets and technical passports at the request of the customer.
Each product is tested for the main parameters, and Test reports of the parameters for each product are provided.
Geography of partnership
AS ENERGITM company manufactures and supplies power semiconductors to more than 50 countries around the world.
Logistics and Delivery
We deliver our products all over the world with the services of logistics companies: DHL, TNT, UPS, EMS, Fedex, Aramex.
Products can be delivered by any means of transport: air, sea, rail and road.
AS ENERGITM Semiconductors Manufacturing
Our products range includes rectifier diodes, phase control thyristors in disc and stud design, avalanche diodes and thyristors, fast switching, high frequency thyristors, fast recovery, welding and rotor diodes, triacs, bridge rectifiers, power modules (thyristor, diode, thyristor-diode, IGBT), and air and water heatsinks to them.
Power diodes and thyristors are produced for currents from 10A to 15000A, voltage range from 100V to 9000V.
Power diode and thyristor modules are produced from 25A and up to 1250A, voltage range 400V - 4400V.
The range of power semiconductors also includes equivalent, replacement, analogue and alternative semiconductor devices of global manufacturers.