Triac TC132-50-10 (TS132-50-10) – Stud Symmetrical Thyristor, 50A 1000V

RMS on-state current, IT(RMS)M (TC) 50A (85ºC)
Voltage, VDRM/VRRM 1000 V
TC132-50-10 on request
+
Добавить
Stud thread M8
Package ST3
Weight 23 g
Datasheet

Stud Triac TC132-50-10AS ENERGITM is general purpose stud triac, also known as TS132-50-10. RMS on-state current IT(RMS)M50 ampere, repetitive peak forward and reverse blocking voltage VDRM/VRRM1000V. Stud triac are designed to convert and control DC and AC currents. "Air-cooled heatsinks O series for stud devices" for thyristor cooling are also available to order.

Triacs, also known as Symmetrical Thyristors, can pass current in both directions. If a positive pulse is applied to the control circuit, only the positive half of the sinusoidal current (1 quadrant) will pass through the triac. If a negative opener current is applied to the control circuit, the triac will pass a sinusoidal current through the main circuit (3 and 4 quadrants).

Air heat sinks are used to cool the symmetrical thyristors. To provide reliable thermal and electrical contact with the heatsink a tightening torque Md must be observed during assembly. For better heat dissipation of thyristor during assembly, heat conducting paste is used (this is a recommendation and is not a prerequisite for installation).

Features: thyristors are supplied in stud design. Pin assignment: hard long lead - main lead 1 (conditional cathode), triac base - main lead 2 (conditional anode), hard short lead - control electrode. Triacs TC132-50-10 (TS132-50-10) (50A 1000V) are used in DC and AC power circuits of electrical installations and in semiconductor power converters.

Triacs AS ENERGITM have the following features: low static and dynamic losses, wide values of VDRM/VRRM, extensive experience of using the devices in various industries, range of voltages from 100 to 9000 V and amperages from 10 to 15000 A, high resistance to thermal and electric cycling, natural or forced air cooling.

The technical specifications and parameters of triacs TC132-50-10 (TS132-50-10), datasheet PDF, outline drawing and dimensions are listed below.

Our company provides a quality guarantee for triacs of 2 years from the date of purchase. When supplying thyristors, if necessary, we provide technical passport and certificate of conformity.

Read more

The final price for stud triacs depends on the voltage class, quantity, delivery terms, manufacturer, country of origin and form of payment.

General specifications of Stud Hard Lead Triac TC132-50-10 (TS132-50-10) (50A 1000V):

Stud Triac specifications TC132-50-10
(TS132-50-10)
RMS on-state current (Case temperature) IT(RMS)M (TC) 50 A (85ºC)
Repetitive pulsed closed state voltage; repetitive pulsed reverse voltage VDRM/VRRM 1000 V
Surge on-state current ITSM 0.45 kA
Safety factor i2t 2025 kA2·s
Peak on-state voltage VTM 1.80 V
Peak on-state current ITM 70 A
On-state threshold voltage VT(TO) 1.00 V
On-state slope resistance rT 12 mΩ
Repetitive peak off-state IDRM 5.0 mA
Critical rate of rise of off-state voltage (dVD/dt)cr 2.2-25 V/µs
Critical rate of rise of on-state current (diT/dt)cr 63 A/µs
Gate trigger direct current IGT 200 mA
Gate trigger direct voltage VGT 3.0 V
Gate controlled delay time tgd 4 µs
Temperature of p-n junction Tvj max 125 ºC
Thermal resistance, junction to case Rth(j-c) 0.52 K/W
Controllability quadrants 1, 3, 4
Weight W 23 g
Package (Housing) type ST3
Stud thread - M8
Datasheet PDF

Part Numbering Guide for Stud Triac:

TC 132 - 50 - 10 4
TC Triac, Thyristor Symmetrical (alternative marking "TS") brand AS ENERGITM
132 Triac type (stud type).
50 RMS on-state current IT(RMS)M, Amp.
10 Voltage class VRRM / 100 (Nominal voltage – 1000 V).
4 Parameter of the critical rate of rise of off-state voltage (dVD/dt)cr:
Alpha-numeric coding M4 H4 C4 A4 T3 M3 E3 A3
Digital coding 1 2 3 4 5 6 7 8
(dVD/dt)cr, V/µs 2,5 4 6,3 10 16 25 50 100

Dimensions of triac TC132-50-10:

dimensions

Package ST3


High Power Semiconductors AS ENERGITM

Our company is engaged in the manufacturer and sale of wide range of power semiconductors (power thyristors, modules, rectifier diodes, avalanche, rotor and welding diodes, triacs etc.) currents up to 15000A and voltages to 9000V, and air and water heatsinks to them.
You can buy semiconductor devices in any volumes, and when ordering large lots, the price will be lower. We have earned the trust of customers and supply products all over the world.

For questions regarding the acquisition of Power Thyristors, Diodes, Modules send an email request to:

[email protected]

And we will provide you a commercial offer for delivery.
For a large number, we will provide an individual price!!!

We are open to manufacture products at our production facilities
according to your requests and technical task.


Installation recommendations for stud mount triacs:

Assembling stud thyristor with a heatsink

The reliability of heat transfer and electrical contact between the mating surfaces of the thyristor and the cooler over the entire temperature range is ensured by appropriate torque.

Before assembly you should perform visual inspection (1) contact surfaces for mechanical damages and wipe (2), soaked with alcohol (toluene, gasoline, acetone).

To improve the parameters of heat transfer it is recommended to lubricate (3) a thin layer of silicone thermal conductive paste before the assembly, which is not a mandatory condition for installation.

After installation, the fasteners (nuts and washers) must be additionally secured against corrosion.


Tips and recommendations for power thyristors:

The power thyristors should not be operated for long periods of time at their limit load for all parameters. In this case, the safety factor is determined by the required degree of reliability of the device.

Replace a failed power thyristor with a thyristor that matches the parameters of the one being replaced.

Supercooling must be provided when operating in an environment with an elevated ambient temperature.

Periodic cleaning of power thyristors and coolers to remove dust and contaminants is recommended to ensure proper heat dissipation.

Inductive current dividers (often twisted toroidal wire) should be used to equalize currents between power thyristors connected in parallel. The most popular connection methods are closed circuit, common coil circuit, or power thyristor. The efficiency of current dividers in this case is determined by the cross section of the magnetic wire.

Prevention of voltage unbalance when power thyristors are connected in series is achieved by using shunt resistors connected in parallel with each thyristor. Voltage equalization in transient conditions is provided by connecting capacitors in parallel to each thyristor.

Device under voltage

It is strictly forbidden to touch power thyristors under high voltage during operation.


icon Why choose AS ENERGITM

  • Own production facilities, including semiconductor silicon chips production
  • European brand - 100% quality, favorable price, short production terms
  • Over 20 years of experience in the semiconductor industry
  • Clients from more than 50 countries trust us
  • 20000 items in the product line for currents from 10A to 15000A, voltages from 100V to 9000V
  • We produce analogues of other manufacturers' products
  • Guaranteed certified quality, warranty period of operation - 2 years

 

Quality Warranty

Our products are certified and correspond to international standards.
Our company provides a quality guarantee for products of 2 years.
We provide certificates of conformity, reliability reports, data sheets and technical passports at the request of the customer.

Certificates

Each product is tested for the main parameters, and Test reports of the parameters for each product are provided.

Test Report

Geography of partnership

AS ENERGITM company manufactures and supplies power semiconductors to more than 50 countries around the world.

Geography

Logistics and Delivery

We deliver our products all over the world with the services of logistics companies: DHL, TNT, UPS, EMS, Fedex, Aramex.
Products can be delivered by any means of transport: air, sea, rail and road.

Logistics

AS ENERGITM Semiconductors Manufacturing

Our products range includes rectifier diodes, phase control thyristors in disc and stud design, avalanche diodes and thyristors, fast switching, high frequency thyristors, fast recovery, welding and rotor diodes, triacs, bridge rectifiers, power modules (thyristor, diode, thyristor-diode, IGBT), and air and water heatsinks to them.

Power diodes and thyristors are produced for currents from 10A to 15000A, voltage range from 100V to 9000V.
Power diode and thyristor modules are produced from 25A and up to 1250A, voltage range 400V - 4400V.
The range of power semiconductors also includes equivalent, replacement, analogue and alternative semiconductor devices of global manufacturers.


Featured Products:

 

Tags: triac 50a, triac 50 ampere, TC132-50-10 technical data sheet, circuits, triac 50a manufacturer, triac SCR 50A 1000V with a heat sink, semiconductor triac SCR 50a replacement equivalent Dynex, Vishay, Infineon EUPEC, IXYS, Westcode, ABB, AE, AEI, AEG, Techsem, SEMPO Electronic Limited, ESTEL, Lamina, Siemens AG, Mitsubishi, triac catalog, triac 50a datasheet pdf, certificate, stud housing, tablet, Russian Triac, factory manufacturer of power scr triac, semiconductor triac, triac price list, order, silicon controlled rectifier

 

Selected Products:

^