Fast Thyristor VS-ST083S10PFK0P, Stud Type, Vishay Replacement

Vishay Part Number VS-ST083S10PFK0P
Average on-state current, IT(AV)M (TC) 85A (85ºC)
Voltage, VDRM/VRRM 1000 V
Stud thread 1/2"-20UNF-2A
Datasheet
Replacement AS ENERGITM ASTS083S10PFK0P
Add to Cart on request
+
Добавить

Fast thyristor ASTS083S10PFK0PAS ENERGITM in stud design is a replacement, analogue, alternative and equivalent semiconductor device for stud type fast thyristors VS-ST083S10PFK0P Vishay Semiconductors.

Average forward on-state current ITAV85 ampere, repetitive peak forward and reverse blocking voltage VDRM/VRRM1000V. Stud thyristor are designed to convert and control DC and AC currents. "Air-cooled heatsinks O series for stud devices" for thyristor cooling are also available to order.

Air and water heat sinks are used to cool the thyristors. To provide reliable thermal and electrical contact with the heatsink a tightening torque Md must be observed during assembly. For better heat dissipation of thyristor during assembly, heat conducting paste is used (this is a recommendation and is not a prerequisite for installation).

Fast thyristors are devices with reduced tq, trr, Qrr values and with a higher value (diT/dt)crit (up to 2500 A/µs) designed to operate at higher frequencies modes (up to 10kHz). The thyristor parameters of VTM, tq, Qrr are interconnected, so a decrease in the value of tq and Qrr leads to an increase in VTM. Fast thyristors are characterized with a very low turn-off time that sets them apart from the standard models. They are used in welding, induction heating and melting, electric transportation, AC drives, UPS, and other systems requiring short turn-on and turn-off times. The thyristors have an industry-standard ceramic sealed housing isolating the functional part and the semiconductor element from mechanical impacts and environment.

Features: thyristors are supplied in stud design. The base of the thyristor is the anode, the flexible power lead is the cathode, the flexible wire exiting the base of the power lead is the auxiliary cathode, the flexible wire exiting the case is the control electrode (gate). This thyristors are notable for their ability to be used on moving parts.

Fast thyristors AS ENERGITM have the following features: low static and dynamic losses, high values of VDRM/VRRM, extensive experience of using the devices in various industries, range of voltages from 100 to 9000 V and amperages from 10 to 15000 A, high resistance to thermal and electric cycling, natural or forced air cooling.

Specifications and parameters, datasheet PDF, dimensions, drawings are listed below.

Our company provides a quality guarantee for thyristors of 2 years from the date of purchase. When supplying thyristors, if necessary, we provide technical passport and certificate of conformity.

Read more

The final price for fast thyristors in stud design depends on the voltage class, quantity, delivery terms, manufacturer, country of origin and form of payment.

General specifications of Fast Thyristor (Stud Type) VS-ST083S10PFK0P Vishay and Replacement:

Fast Thyristor specifications VS-ST083S10PFK0P
Maximum allowable average forward current (Case temperature) IT(AV) (TC) 85 A (85ºC)
Repetitive pulsed closed state voltage; repetitive pulsed reverse voltage VDRM/VRRM 1000 V
RMS on-state current ITRMS 135 A
Surge on-state current ITSM 2450 A
Safety factor I2t 30 kA2·s
Threshold voltage VT0 1.52 V
On-state slope resistance rT 2.34 mΩ
Peak on-state voltage VTM 2.15 V
Peak on-state current ITM 300 A
Turn-off time, max tq 10-20 µs
Temperature of p-n junction Tvj max 125 ºC
Thermal resistance, junction to case Rth(j-c) 0.025 K/W
Mounting torque, non-lubricated threads Md ± 10 % 15.5 N
Weight W 130 g
Package (Housing) type TO-94
(TO-209AC)
Stud thread Ød 1/2"-20UNF-2A mm
Replacement AS ENERGITM type ASTS083S10PFK0P
Datasheet PDF

Part Numbering Guide for Fast Thyristors:

AS TS 08 3 S 10 P F K 0 P
AS brand AS ENERGITM
TS Product group: Thyristor Stud.
08 Essential part number.
3 Fast turn-off thyristor
S Compression bonding stud.
10 Voltage class VRRM / 100.
P Stud base 1/2"-20UNF-2A threads.
F Parameter of the critical rate of rise of off-state voltage (dVD/dt)crit:
Letter coding C D E F H
Value, V/µs 20 50 100 200 400
K Parameter of turn-off time tq:
Letter coding N M L P K J H
Value, µs 10 12 15 18 20 25 30
0 Eyelet terminals (gate and auxiliary cathode leads).
P PbF = lead (Pb)-free
None = standard production
.

Polarity (anode, cathode, gate) of power fast thyristors:

Thyristor polarity Fast Thyristors Stud Type

High Power Semiconductors AS ENERGITM

Our company is engaged in the manufacturer and sale of wide range of power semiconductors (power thyristors, modules, rectifier diodes, avalanche, rotor and welding diodes, triacs etc.) currents up to 15000A and voltages to 9000V, and air and water heatsinks to them.
You can buy semiconductor devices in any volumes, and when ordering large lots, the price will be lower. We have earned the trust of customers and supply products all over the world.

For questions regarding the acquisition of Power Thyristors, Diodes, Modules send an email request to:

[email protected]

And we will provide you a commercial offer for delivery.
For a large number, we will provide an individual price!!!

We are open to manufacture products at our production facilities
according to your requests and technical task.


Photo Gallery

The photo gallery shows many different semiconductor devices, semiconductor chips and SCRs produced by AS ENERGITM, examples of test reports.


Installation recommendations for power stud mount thyristors:

Assembling stud thyristor with a heatsink

The reliability of heat transfer and electrical contact between the mating surfaces of the thyristor and the cooler over the entire temperature range is ensured by appropriate torque.

Before assembly you should perform visual inspection (1) contact surfaces for mechanical damages and wipe (2), soaked with alcohol (toluene, gasoline, acetone).

To improve the parameters of heat transfer it is recommended to lubricate (3) a thin layer of silicone thermal conductive paste before the assembly, which is not a mandatory condition for installation.

After installation, the fasteners (nuts and washers) must be additionally secured against corrosion.


Tips and recommendations for power thyristors:

The power thyristors should not be operated for long periods of time at their limit load for all parameters. In this case, the safety factor is determined by the required degree of reliability of the device.

Replace a failed power thyristor with a thyristor that matches the parameters of the one being replaced.

Supercooling must be provided when operating in an environment with an elevated ambient temperature.

Periodic cleaning of power thyristors and coolers to remove dust and contaminants is recommended to ensure proper heat dissipation.

Inductive current dividers (often twisted toroidal wire) should be used to equalize currents between power thyristors connected in parallel. The most popular connection methods are closed circuit, common coil circuit, or power thyristor. The efficiency of current dividers in this case is determined by the cross section of the magnetic wire.

Prevention of voltage unbalance when power thyristors are connected in series is achieved by using shunt resistors connected in parallel with each thyristor. Voltage equalization in transient conditions is provided by connecting capacitors in parallel to each thyristor.

Device under voltage

It is strictly forbidden to touch power thyristors under high voltage during operation.


icon Why choose AS ENERGITM

  • Own production facilities, including semiconductor silicon chips production
  • European brand - 100% quality, favorable price, short production terms
  • Over 20 years of experience in the semiconductor industry
  • Clients from more than 50 countries trust us
  • 20000 items in the product line for currents from 10A to 15000A, voltages from 100V to 9000V
  • We produce analogues of other manufacturers' products
  • Guaranteed certified quality, warranty period of operation - 2 years

 

Quality Warranty

Our products are certified and correspond to international standards.
Our company provides a quality guarantee for products of 2 years.
We provide certificates of conformity, reliability reports, data sheets and technical passports at the request of the customer.

Certificates

Each product is tested for the main parameters, and Test reports of the parameters for each product are provided.

Test Report

Geography of partnership

AS ENERGITM company manufactures and supplies power semiconductors to more than 50 countries around the world.

Geography

Logistics and Delivery

We deliver our products all over the world with the services of logistics companies: DHL, TNT, UPS, EMS, Fedex, Aramex.
Products can be delivered by any means of transport: air, sea, rail and road.

Logistics

AS ENERGITM Semiconductors Manufacturing

Our products range includes rectifier diodes, phase control thyristors in disc and stud design, avalanche diodes and thyristors, fast switching, high frequency thyristors, fast recovery, welding and rotor diodes, triacs, bridge rectifiers, power modules (thyristor, diode, thyristor-diode, IGBT), and air and water heatsinks to them.

Power diodes and thyristors are produced for currents from 10A to 15000A, voltage range from 100V to 9000V.
Power diode and thyristor modules are produced from 25A and up to 1250A, voltage range 400V - 4400V.
The range of power semiconductors also includes equivalent, replacement, analogue and alternative semiconductor devices of global manufacturers.


Featured Products:

 

Tags: fast stud thyristor VS-ST083S10PFK0P Vishay replacement, VS-ST083S10PFK0P replacement, VS-ST083S10PFK0P technical data sheet, catalogue, specifications, fast thyristor stud type SCR 85 ampere 1000 V with a heatsink, factory manufacturer of power scr stud type fast thyristor, stud thyristor, stud thyristor price list, order, silicon controlled rectifier, fast thyristors stud 1000, fast thyristor stud type 1000

 

Selected Products:

^